Create a Traffic Shaping Policy Referencing the images below:. Navigate to your VOIP Profile and set the Register, Invite, and SCCP request limits as suggested by your installation technician. Ensure the policy is active, or turn it on once you apply the settings. Use the appropriate LAN connection for your configuration. NOTE: You may use a different name for the internal connection depending on how your device is configured. (It is suggested to use a descriptive name such as the one used in this example) Referencing the images below create the Spectrum policy. Fill in the appropriate port information for each port described under Ports - Stratus Platform & Ports - Enswitch 1 and 2 Platforms. Left single mouse-click on CREATE NEW > SERVICE. Left single mouse-click on CREATE NEW > SERVICE and perform the following steps for each of the Spectrum VoIP IP ports referenced above. Once you have selected all of the addresses look for the Close button at the bottom of the Select Entries and left single mouse-click. Left single mouse-click on each of the Spectrum VOIP Address Objects you created in the previous step. Left single mouse-click the + sign under the Members object. Left single mouse-click on CREATE NEW > ADDRESS Group. Navigate to POLICY AND OBJECTS > ADDRESSES and perform the following:. Fill in the SUBNET / IP RANGE with ONE of the addresses. Left single mouse-click on CREATE NEW > ADDRESS. Navigate to POLICY AND OBJECTS > ADDRESSES and perform the following steps for each of the Spectrum VoIP IP Public Subnets referenced above. 
Create Spectrum VoIP Addresses, Services, and Address Groups using the following information:.Fill in the information and enable the settings as shown in the Edit Traffic Shaper screenshot.Referencing the images below, create a VoIP Traffic Shaper.Look for the option Inspection Mode and left single mouse-click on the option PROXY (this allows you to build VoIP proxies).Go to SYSTEM > SETTINGS and scroll down to almost the bottom of the page.Set Inspection Mode To Proxy, Referencing the image below:.Enable Traffic Shaping and VoIP under the ADDITIONAL FEATURES column.
Enable Traffic Shaping, Referencing the image below:.To disable this setting, run the following command in the Command Line Interface (CLI): Reboot the Router while using the Web GUI under Status, or in the CLI with the following command:ĭisable Strict Register Strict Register forces VoIP devices through a pinhole at port 65476 and will cause duplicate porting to occur. set default-voip-alg-mode kernel-helper-based.Please pay particular attention to spaces and dashes in the CLI based steps or you may receive error warningsįrom the Fortinet Appliance Command Line Interface Remove SIP Helper In the Command Line Interface (CLI) run the following commands:ĭisable SIP ALG In the Command Line Interface (CLI) run the following commands:
0 kommentar(er)
